17 Best Types Of Tools for Cutting Tree You Need Know

Tree cutting tools are the instruments that are used to cut a tree or a branch. There are a number of different types of equipment and implements that are used for the purpose. The main types of tree cutting tools include:

Hand tree cutting tools

Bow Saw

It is a hand operated saw that may be used to cut small branches. The bow saw comes with two blades, one at each end. To cut the branch, one blade is fixed in place while the other blade is moved back and forth to the opposite side of the stationary blade.

The blade is held in place by a rigid frame. Proper techniques and training are required to effectively use this equipment. It may not be capable of cutting larger branches, but can cut smaller ones with ease.

Pruning Saw

It has a small blade that allows for precise cuts that are usually needed for pruning purposes as well as for pruning dead branches.

This saw is used to make cuts on any side of the branch or tree trunk. It allows a tree care professional to remove portions that are not needed and leave other parts intact, while still allowing the remaining portions to continue growing.

Felling Saw

It has a long blade with sharp teeth that can cut down a tree. It is used to chop down trees that are very tall, as tall as 100 feet or more.

It may not be capable of cutting down small trees, but it can chop off a large percentage of the tree in one go. A felling saw is capable of cutting larger branches as well. The larger the trunk, the more effective it becomes.

The Axe

This is one of the oldest tools used for cutting and shaping wood. It has been in use since prehistoric times. The axe was a very useful hand tool as it could be applied to a variety of purposes.

However, modern axes have changed quite a bit from their earlier day counterparts. Earlier axes were made mostly out of stone or bronze. Most axes designed currently are made of steel and have a handle made out of wood or plastic.

Hand Pruners

It has an adjustable blade with sharp teeth and can be operated by hand for pruning purposes. They usually have three blades which can help in making cuts along the length of the branch or tree.

The handles may be made of plastic or wood, depending on the type. Hand pruners come in different types and sizes as well as with varying cutting capacities. There are long handled ones that can support a longer blade which makes it easier to cut larger branches.

Pulaski

This type of tool is basically a combination of an axe and an adz, as it combines the two tools into one. It has a curved blade with sharp teeth on the back side that helps in making deeper cuts. The flat side of the blade can be used to strike down blows as well.

The pulaski is designed for the purpose of forest management and timber harvesting as well as for chopping firewood.

Crosscut Saw

This tool is basically a long blade, usually about two feet long, that has a handle at each end. It is operated by pushing one handle back and forth to make the blade move along the length of the branch or tree trunk. This saw can cut branches of several inches in diameter and larger ones as well.

This tool is also known as a handsaw or hand saw. It is used to cut across the grain and it does not have an oscillating blade. The design of this tool allows for more control than other types of saws. This saw can be operated by one person at a time, unlike other tools that require two workers at the same time.

Pole Tree Saw

This saw is operated by two people at the same time. One holds the pole and uses the other end of it to push a cutting blade back and forth to make it move along a branch or tree trunk. It can cut branches that are larger in diameter than hand tools but cannot match up to chain saws.

It may not be capable of cutting as big a branch if the pole is too short, so this can be a disadvantage for workers with shorter height. It has less power and control compared to other types of saws, which makes it difficult to cut thicker branches.

This tool is also known as an Alaskan blade, as the design came from Alaska. It is similar to a chainsaw but only has one cutting blade instead of two. The single blade runs along the branch or tree trunk while being held up by a guide on top.

It can make deep cuts when used carefully, and its sawdust can be collected so it doesn't get scattered all over the place.

A chainsaw is a very useful tool for cutting down trees, although it can be dangerous if not used properly. It is capable of cutting down long branches in one go and its blade can come in different sizes depending on the type.

It has an oscillating blade that makes it much more efficient for cutting large branches and tree trunks.

Border saw

Border saws have a long handle with an oscillating blade. It is used for cutting across the grain of the branch or tree in horizontal lines, and it is similar to the crosscut saw, except that its blade moves perpendicular to the wood surface.

It usually has a long handle and an adjustable blade that can be moved in the direction of the wood grain. The design of this tool makes it possible to make cuts on wider pieces without having to reposition it all over again.

coping saw

A coping saw consists of a thin blade held up by a frame. It has fine teeth and is used for cutting along the wood grain, which makes it easier to cut intricate patterns or designs on wooden objects.

It can be operated by one person but only on smaller pieces of wood that have small curves in them.

Bucking saw

Bucking saws are used for making cuts across the grain of branches and tree trunks. It can cut through wood that is up to a half inch in diameter, and its frame usually has a metal plate under it so it will not damage the surface that it is sliding on.

The familiar crosscut saw with extended handle to allow for more control and precision. The long saw is pushed back and forth by two people, but it can cut down even the toughest of branches.

Pruning shears

Pruning shears are used to trim branches or twigs that are too small for other tools. They can be operated by one person and it only takes a good pair of scissors to cut small wood pieces, like grasses, flowers, etc.

These hand saws can be found in hardware stores and are very helpful in cutting thin branches and twigs, especially for flowers.

Hedge Shears

Hedge shears are mainly used for trimming thick branches with rough surfaces. They can cut through large tree trunks and their design can give the user more control over how deep they are cutting into a branch or trunk.

This tool has sharpened blades attached to a rotating beam that cuts through logs and stumps from both sides at the same time, and it is used mostly for cutting large tree trunks.

Gas Powered Chain Saw

Climb-Able Pole Saw

A tree climber can use a pole saw to cut branches and small trunks that are on or above the climbing path. While the tree climber is climbing up, he/she will remove any deadwood to prevent any possible accidents. Before using this type of equipment, it should be tested adequately because sometimes it might break and fall down while cutting a branch.

This tool allows for cutting branches above eye level. It is great to use when trees are surrounded by houses or power lines and the best way to remove them without causing damage.

Pole Pruners

A pole pruner is attached to the end of a boom that is fixed on the climbing path; it cuts branches and trunks that are close to the ground, while it can also be used to cut smaller treetops as well as twigs.

It usually comes with a safety belt in order to avoid any accidents while it is being used. Some are designed to cut through branches and small trunks, while some others can just cut smaller tree tops.

Electric Chain Saw

An electric chain saw can be used to cut branches and small trunks in case of an emergency. It is known for its lightweight, so it is easier to use than gas-powered ones. An electric chain saw has more power compared to a powered wood cutting tool, since it runs on electrical energy rather than gasoline.

It can cut through wood without any noise, unlike a gas-powered chain saw that is known for making loud noises when it cuts down a tree.

This type of saw has the same features as other types of chainsaws, but it uses electrical energy in order to operate instead of gasoline. This tool can be used to cut small trees as well as branches, which makes it a very useful tool for emergency use.

This tool can be used to help with cutting down small trees when there is no time to wait until a chainsaw is brought over from another location. It has an electric motor that uses chains in order to cut down large branches and small tree trunks.

It is also known as a pole chainsaw, since it can cut through branches that are on or above the climbing path. It works just like a normal chainsaw but operates using a high-speed electric motor rather than gas, and it uses electrical energy in order to operate.

Cutoff Saw

A cutoff saw is mainly used for cutting metal and concrete, but it can also be used on wood. It comes with a frame that holds the blade tight so it does not move around while its handle is being pushed back and forth by an operator. It cuts through wood fast, which makes it really useful when there are big projects to do.

This tool is similar to a chainsaw in shape and size, but unlike a chainsaw it uses an electric motor rather than gas. It's blades are handheld with its motor on the bottom so that it can be pulled up against branches or tree trunks when needed.

This kind of chain saw uses gasoline or diesel fuel to operate, while an electric chain saw only operates using electrical energy without any gas or oil.

Hedgerow Saw

This tool is used to cut hedgerows, since it can be held in both hands while the operator cuts through branches on both sides. It has a curved blade that allows for fast cutting of trees and shrubs.

It comes with a frame so that the blade will not move while it is being pushed back and forth by an individual. Clamp-on chainsaws are also known as "hedgerow saws", which means that it's a type of hand held chainsaw.

This tool has a sharp cutting blade with teeth on one side, while the other side is smooth and flat in order to give its user better control of the blade. It can be used for thin stems and branches on trees and shrubs, as well as some thick ones.

It is a powerful tool since it has a high-speed electric motor that can cut through all kinds of branches and small tree trunks. It also cuts faster compared to when an individual uses hand tools such as loppers or shears in order to cut down branches and small tree trunks.

This tool has a curved blade that can quickly cut through branches and small tree trunks all the way around, since it is held in both hands while an individual cuts down trees or shrubs. It is mainly used in landscape construction but it can also be used for gardening jobs.

FAQs

-What are the benefits of using a chainsaw?

A chain saw is useful because it can cut through large branches and small tree trunks which would be hard to do using an axe. This allows for fast cutting of trees, which helps save time and people's effort. This tool is mainly used for cutting trees, especially during emergencies or when there are a lot of big projects to do. It can also be used for cutting wood in order to make furniture and other household items.

-What are the types of chainsaws?

There are different kinds of chain saws, which are also known as "chain-driven saws". These saws can be used to cut through tree branches and small tree trunks, and they work by using a gasoline engine in order to operate.

-What are the major applications of the chainsaw?

The application of a chain saw is mainly through cutting off tree branches, and it can also be used for cutting down small trees. It has a long bar in order to help its user cut through thick tree trunks and branches fast, which makes it useful when there are emergencies or large projects that need to be finished with these tools.

-What is the largest tree that a chain saw has cut?

There was a record for the largest tree that had been cut using a chainsaw, and it measured at 1,250 pounds when it fell down. It was cut by Robert Van Wyk in Pretoriuskop, South Africa, and it was a white pine tree that measured over four meters in diameter.

Conclusion

These are the different types of tree cutting tools available for purchase. They can help you cut down trees and shrubs faster with less effort, which makes it useful during emergencies or when there is a lot of work to do fast. These tools are mainly used in landscape construction but they can also be used as a side tool for other gardening jobs.